Wolf ICBCT36EU - Manual (Page 14)

14
W O L F E L E C T R I C C O O K T O P U S E & C A R E
I N I T I A L S TA R T - U P
Before operating the cooktop for the first time,
please read the entire Use & Care Information.
Clean the cooktop surface as outlined in the
Ceramic Glass Top cleaning section on page
18. The cooktop surface must be free of any
foreign substances, especially those that could
melt and permanently adhere to the glass.
During the first uses of your new electric
cooktop, you may smell a slight burning odor
or see light smoke. Both of these conditions
are normal in new ceramic glass cooktops.
H O T - S U R F A C E I N D I C A T O R
As a safety precaution, a hot-surface indicator
light will illuminate when the surface
temperature of any one of the heating
elements rises above 65˚C.
will illuminate
in the control panel. It will remain illuminated
until the entire surface temperature has
decreased to a safe level. Even if the cooktop
controls are turned off, you are alerted that an
area of the cooktop remains hot.
C O O L I N G F A N
The electric cooktop is equipped with a cooling
fan that automatically turns on to cool internal
parts. The fan will turn off once internal
temperatures have been lowered. During
extended use, the cooling fan may continue to
run even after the cooktop has been turned off
until internal temperatures have been lowered.
Make sure that the cooktop surface is
clean and dry before operating.
Do not place hot cooking utensils directly
over the control panel.
Hot-surface
indicator light
Hot-surface indicator light