Wolf ICBCT36EU - Manual (Page 20)

20
W O L F T R O U B L E S H O O T I N G G U I D E
T R O U B L E S H O O T I N G G U I D E
P R O B L E M P R O B A B L E C A U S E C O R R E C T I O N
Cooktop does not Cooktop is in Lock mode. Touch and hold the
function at all symbol for 3 seconds to unlock
the control panel.
Cooktop is in Lock mode Errors may be cleared by
and the timer display shows pressing the button.
an error code.
No electricity is being Have an electrician check the
supplied to the cooktop. house power supply.
Fuse is blown or circuit Have an electrician replace the
breaker is tripped. fuse or reset the circuit breaker.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Heating elements do not Power supply connection Have an electrician tighten
heat properly is loose. connections at the electrical
box.
Cooktop is not connected to Have an electrician verify that
a proper electrical circuit. the proper voltage is being
applied to the cooktop.
Heating elements cycle Heating element temperature This is a normal function of the
off when unit is set for limiters are temporarily cooktop. The elements will turn
full power shutting off element due to on when the temperatures have
temperatures approaching cooled sufficiently.
the maximum allowable limit
of the ceramic glass
.