Westell Technologies 36R570 - Manual (Page 44)

ADSL WireSpeed Pro 36R570 Proxy Router
User Guide
030-300153A 44 The WebShare Management Interface
Creating a New Access List
Adding a new Access List provides a custom access configuration for a user or group of users. User-defined Access Lists
allow you to apply special rules in addition to those in the Universal list. An Access List is created by first specifying the IP
address (or range) to which the services apply, then by adding services to the list. Each service listed on the Access List is
another service allowed or denied to the IP address(es) for that list. You can add or delete individual services to customize
firewall control.
To add a new Access List:
1. Click the link, Add New Access List. The Firewall - Add new Access List screen appears.
Figure 40. Firewall--Add New Access List
2. From the IP Type drop-down list, select the IP type you are adding (Single IP, IP Range, or IP Subnet).
3. In the fields provided for IP1, type the IP address of the list you are adding. If you selected IP Range for the IP Type
drop-down, type the first IP address of the range under IP1 and the last IP address of the range under IP2.
4. Click the Save button at the bottom of the Firewall: Add new Access List screen.
Adding a Service
Adding a service to an Access List allows users to send traffic of that type outside the local network.
To add a service:
1. Click on the Access List folder to display the current Access Lists.
2. Click the ADD box to the right of ALLOWED OUTBOUND SERVICES. The Firewall - Add a service window
opens.
Figure 41. Firewall--Add a Service
3. From the Services drop-down list, find the service you wish to add.