Wibur Curtis Company PTT3 - Manual (Page 2)

To Go Into Programming
Turn off (dark display) by pressing ON/OFF button (yellow). Press and hold BREW button 4 (green) and then press and release ON/OFF button (yellow).
Continue holding BREW button. Display will read , wait until is displayed Enter the 4-digit access code, the digits 1-4 corre-
spond to the buttons (see illustration below).
The default code set at the factory is 1-2-3-4. Then will be displayed.
PROGRAM MENUS
All programming selections are performed with the three center buttons.
The symbols below the buttons are:
Scroll LEFT
 SELECTION or ENTER to save new parameter
Scroll RIGHT
4 3 1 2
2
Continued on Page 3
Service Manual – Tea Brewer
Program Menus
Tea By Volume
Tea Recipes
Tea By Time
Program Menus screen. Press > button, to show the next menu item.
Tea Recipes (Factory set to Standard Tea Purple)
Press  to Select. Press < or > to scroll through recipes: Standard Gray, Standard Purple, Tropical Gray, tropical
Purple, 76/308 Gray or 76/308 Purple. Press  to set.
Tea by Volume: Press  to select, Display will now show Push START To Begin... Press the BREW button then
hot water starts running, when desired volume is reached press BREW button again to stop the flow. Now the
volume has been set. Pressing > button will display the subsequent menu features.
Tea by Time (Factory set to Standard Tea Purple)
Press  to Select. By pressing < or > buttons, you can view selections available: Standard Gray, Standard Purple,
Tropical Gray, tropical Purple, 76/308 Gray or 76/308 Purple. Press  to set.
Tea Dilution Delay (Factory set to Standard Tea Purple)
Press  to Select. Press < or > buttons, to view selections available: Standard Gray, Standard Purple, Tropical
Gray, tropical Purple, 76/308 Gray or 76/308 Purple. Press  to set.
Tea Dilution Volume: Press  to Select, Display will now show Push START To Begin... Press the BREW button
and water will flow, when desired volume is reached press BREW button again to stop the flow. Now the volume
has been set. Press > to display subsequent menu features.
Dilution Time (Factory set to Standard Tea Purple)
Press  to Select. Press < or > buttons, to view selections available: Standard Gray, Standard Purple, Tropical
Gray, tropical Purple, 76/308 Gray or 76/308 Purple. Press  to set.
Tea Dilut Volume
Tea Dilut Delay
Tea Dilut Time