Weider WEBE4496.0 - Manual (Page 19)

19
36. Wrap the Cable (131) over a Small Pulley (59).
Attach the Small Pulley and a Cable Trap (76) to
the Rear Frame (31) with an M10 x 45mm Bolt
(104) and an M10 Nylon Locknut (94).
37. Wrap the Cable (131) under a Small Pulley (59).
Attach the Small Pulley, two Half Guards (62),
and a Cable Trap (76) to the “U” Bracket (57) with
an M10 x 50mm Bolt (111) and an M10 Nylon
Locknut (94).
Make sure the Half Guards are
oriented as shown.
36
37
31
94
76
59
104
131
59
111
62
131
76
57
94
62
35. Position the Bottom Plate (65) and the Top Plate
(64) around the Cable (131) as shown. Attach the
Bottom and Top Plates to the Right Front Frame
(33) with two M4 x 16mm Self-tapping Screws
(102).
35
102
131
102
64
65
33