Winbook X Series X2 - Manual (Page 122)

Exit Menu (Figure 7.9)
Once you have made the necessary changes to your Setup program, you
can use this menu to exit.
Exit Saving Changes: This item will save all the changes that you made
during this session and exit the Setup program. Your system will then
reboot with the new settings. If you notice any problems with the operation
of your system, you will need to re-enter the Setup program and correct
settings that might be causing the problems.
Chapter 7: Configuring & Maintaining Your System
7.15
Figure 7.8: The Boot Menu
PhoenixBIOS Setup Utility
Item Specific Help
F1 Help
ESC Exit
Select Item
Select Menu F5/F6 Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Main Advanced Security Boot Exit
+Hard Drive
ATAPI CD-ROM Drive
Removable Devices
Keys used to view or con-
figure devices:
<Enter> expands or
collapses devices with
a + or –
<Ctrl+Enter> expands all
<Shift + 1> enables or dis-
ables a device.
<+> and <-> moves the
device up or down.
<n> May move removable
device between Hard Disk
or Removable Disk <d>
Remove a device that is
not installed.
➔
➔
➔ ➔
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 127