Series – Winbook X Series X2 User Manual
Page 141
PROBLEM: Cannot boot from CD.
ACTIONS:
• Boot sequence might be set to access the C: drive first. Enter the Setup
program (see Chapter 7) and check the Boot Menu. Scroll down to the
“ATAPI CD-ROM Drive” item and use the [+] key to move it ahead of
the Hard Drive category.
• CD does not have the necessary files to properly boot. Try another
bootable CD.
• CD is damaged. If this is the Restore CD that came with your WinBook
notebook, contact Technical Support about obtaining a replacement.
• Open the drive door and be sure that the CD-ROM is properly seated
in the drive.
PROBLEM: Computer does not come on when the power switch
is turned on.
ACTIONS:
• Be sure to depress and hold the power switch for at least 4 seconds.
• Be sure that battery is properly seated in the battery bay.
• If you are not sure of the battery charge level, try connecting the
AC adapter.
PROBLEM: No video output to LCD.
ACTIONS:
• Be sure that the output has not been redirected to an external monitor.
Use the [Fn]+[F10] key combination to toggle the video output.
8.8
Series
User’s Manual
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 146