Winbook X Series X2 - Manual (Page 83)

You will see the Network Properties window. (Figure 4.21) In the upper
box of that window, you will see the Network clients, adapters and proto-
cols associated with your hardware. If your network uses a protocol or
client that is not listed, you can add that component by clicking on the Add
button and selecting the component from the list provided. If you are using
a standard network with Windows Me computers, you should be able to
use the established components to set up your network.
The easiest way to get your computer established in the home network
(or other small network) is to use the Home Networking Wizard. Double-
click on the My Network Places icon on the desktop. This will open the
My Network Places window. (Figure 4.22) Double-click on the Home
Networking Wizard and follow the instructions provided. If you are going
4.20
Series
User’s Manual
Figure 4.21: Windows Me Network Properties Figure 4.22: Windows Me Network Places
X Manual WinME w/photos 2/01/01 3/19/01 4:24 PM Page 86