Weider 240 TC - Manual (Page 11)

11
14. Attach the Left Barbell Hook (51) to a Weight
Rest (13) as shown with an M10 Silver Washer
(70) and an M10 Silver Locknut (34). Do not
overtighten the Silver Locknut; the Left
Barbell Hook must pivot easily.
Insert the Weight Rest (13) into the Left Upright
(6), and tighten an Upright Knob (27) through
the Left Upright into one of the adjustment holes
in the Weight Rest.
Repeat this step for the other side of the
weight bench.
6
51
34
70
13
27
14
15. Insert a Short Pad Tube (35) into the Left Fly
Arm (10). Slide a Small Foam Pad (26) onto the
Short Pad Tube.
Repeat this step for the other side of the
weight bench.
15
35
10
26
16. Attach the Curl Pad (20) to the Curl Post (9)
with two M6 x 16mm Screws (61).
16
61
20
9