Weider 240 TC - Manual (Page 8)

8
7
17
Bracket
6
Bracket
Pins
6
6. Orient the Backrest Support (17) so that the
pins are facing downward.
Set the Backrest Support (17) in one of the sets
of brackets on the Left and Right Uprights (6,
7).
7. Attach a Fly Arm Bumper (30) to the Left
Upright (6) with a Bumper Knob (50).
Attach the other Fly Arm Bumper (30) to the
Right Upright (7) in the same way.
8. Identify the Left Fly Arm (10), which has a pivot
tube on the indicated side.
Apply grease to an M10 x 130mm Bolt (58).
Attach the Left Fly Arm (10) to the Left Upright
(6) with the M10 x 130mm Bolt (58), an M10
Black Washer (64), and an M10 Black Locknut
(66).
Repeat this step for the other side of the
weight bench.
7
8
50
30
30
6
7
64
10
58
Pivot
Tube
Grease
6
66