Western Telematic RMM-288 - Manual (Page 12)

&M5 ARQ mode
&Nn Sets connect speed. If connection cannot be established at this speed, the
modem will hang up. Sets ceiling connect speed if &Un is greater than 0 (See
&Un).
* &N0 Variable Rate
&N1 300 bps
&N2 1200 bps
&N3 2400 bps
&N4 4800 bps
&N5 7200 bps
&N6 9600 bps
&N7 12,000 bps
&N8 14,400 bps
&N9 16,800 bps
&N10 19,200 bps
&N11 24,000 bps
&N12 24,000 bps
&N13 26,400 bps
&N14 28,800 bps
&N15 31,200 bps
&N16 33,600 bps
&Pn Sets pulse (rotary) dial make/break ratio.
* &P0 U.S.A./Canada ratio; 39%/61%
&P1 U.K. ratio; 33%/67%
&Rn Sets Receive Data (RD) hardware flow control, Request to Send (RTS) (See
also &In).
&R0 Reserved
* &R1 Modem ignores RTS
&R2 Received Data to computer
&Sn Controls Data Set Ready (DSR) operations.
* &S0 DSR override; always ON
RMM Rack Mount Modem; User's Guide
file:///C|/WEBPAGE/guides/rmm/rmm_manl.htm (12 of 21) [2/7/2000 10:55:44 AM]