Western Telematic RMM-288 - Manual (Page 18)

7 128 Software compatibility code. This setting
disables the codes and displays the 9600
code instead. The actual rate of the call can
be viewed on the ATI6 screen. Used for
unusual software incompatibilities. Some
software may not accept 7200, 12000 and
14400 bps or greater result codes.
S28 0 Eliminates the V.32 answer tones for a faster connection.
8 Default item, all times are in tenths of a second.
255 Disables all connections except V.32 at 9600 bps.
S29 20 Sets the duration (in tenths of a second) of the V.21 answer mode.
S30 0 Reserved
S31 128 Reserved
S32 2 Bit-mapped register setup for 28.8 modems only. To set the register,
see the instructions for S13.
Bit Value Result
0 1 Enable V.8 Call Indicate.
1 2 Enable V.8 mode.
3 8 Disable V.34 modulation.
4 16 Disable 33.6 Kbps support.
5 - 7 32 - 128 Reserved
S33 0 Bit-mapped register setup for 28.8 modems only. To set the register,
see the instructions for S13.
Bit Value Result
0 1 Disable 2400 symbol rate.
1 2 Disable 2743 symbol rate.
2 4 Disable 2800 symbol rate.
3 8 Disable 3000 symbol rate.
4 16 Disable 3200 symbol rate.
5 32 Disable 3429 rate.
6 64 Reserved
7 128 Disable shaping.
RMM Rack Mount Modem; User's Guide
file:///C|/WEBPAGE/guides/rmm/rmm_manl.htm (18 of 21) [2/7/2000 10:55:45 AM]