Toshiba Libretto U100 - Manual (Page 146)

7-6 User’s Manual
HW Setup
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
This feature enables or disables the Built-in LAN.
Device Config
Device Configuration
This option lets you set the device configuration.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation.
If your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
Enabled
Enables Wake-up on LAN.
Disabled
Disables Wake-up on LAN. (Default)
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled
Enables Built-in LAN functions (Default).
Disabled
Disables Built-in LAN functions.
All Devices
BIOS sets all devices.
Setup by OS
Operating system sets devices that it can control
(Default).
Enabled
Enables USB KB/Mouse Legacy Emulation
(Default).
Disabled
Disables USB KB/Mouse Legacy Emulation.