Special features, Special features -12 – Toshiba Libretto U100 User Manual

Page 30

Advertising
background image

1-12

User’s Manual

Introduction

Special features

The following features are either unique to TOSHIBA computers or are

advanced features, which make the computer more convenient to use.

Disclaimer (Wireless LAN/Atheros)

The transmission speed over the wireless LAN and the distance over

which wireless LAN can reach may vary depending on surrounding

electromagnetic environment, obstacles, access point design and

configuration, and client design and software/hardware configurations.
[54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g)

standard.] The actual transmission speed will be lower than the theoretical

maximum speed.
To use the Atheros Super AG

TM

or Super G

TM

function, your client and

access point must support the corresponding feature. Performance of

these functions may vary depending on the format of data transmitted.

Wireless

communication

switch

This switch turns the Wireless LAN and

Bluetooth functions on and off.
All models are provided with Wireless

Communication switch. Some models are equipped

with both Wireless LAN and Bluetooth functions.

Hot keys

Key combinations let you quickly change the

system configuration directly from the keyboard

without running a system configuration program.

Display automatic

power off

This feature automatically cuts off power to the

computer’s LCD display panel when there is no

keyboard input for a time specified. Power is

restored when any key is pressed. You can

specify the time in the Monitor power off item of

the Basic Setup tab in TOSHIBA Power Saver.

HDD automatic

power off

This feature automatically cuts off power to the

hard disk drive when it is not accessed for a time

specified. Power is restored when the hard disk is

accessed. You can specify the time in the HDD

power off item of the Basic Setup tab in TOSHIBA

Power Saver.

System automatic

Standby/Hibernation

This feature automatically shuts down the system

in Standby mode or Hibernation mode when there

is no input or hardware access for a time

specified. You can specify the time and select

either the System Standby or System Hibernation

item of the Basic Setup tab in TOSHIBA Power

Saver.

Advertising