Toshiba Libretto U100 - Manual (Page 151)

User’s Manual 8-3
Optional Devices
Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to PC card and click.
3. Slide the PC card eject latch to extend it.
4. Grasp the PC card and draw it out.
Figure 8-2 Removing the PC card
SD card
The computer is equipped with an SD card slot that can accommodate
Secure Digital flash memory cards with various memory capacities.
SD cards let you easily transfer data from devices, such as digital cameras
and Personal Digital Assistants, that use SD card flash-memory. The cards
have a high level of security and copy protection features. The slot cannot
accommodate Multi Media cards.
If the PC card is not inserted all the way, the eject latch may not cause it to
pop out sufficiently to allows it to be grasped. Be sure to push the PC card
firmly into the computer and slide the eject latch again.
PC card
PC card eject
latch
When you are not using a PC Card in the computer, please ensure the
Dummy Card is in place to protect the slot.
Keep foreign objects out of the SD card slot. Never allow metal objects,
such as screws, staples and paper clips, to enter the PC or keyboard.
Foreign metal objects can create a short circuit, which can cause PC
damage and fire, possibly resulting in serious injury.
SD memory cards comply with SDMI (Secure Digital Music Initiative),
which is a technology adopted to prevent unlawful copy or playback of
digital music. For this reason, you cannot copy or playback protected
material on another computer or other device. You may not use the
reproduction of any copyrighted material except for your personal
enjoyment.