Toshiba Libretto U100 - Manual (Page 97)

User’s Manual 4-27
Operating Basics
If you require a more effective setting for the power management system,
you can select another mode such as High Power Savings. To select this
mode, follow the steps below.
1. Click the Power Management tab.
2. Select High Power Savings in the Power Mode pull-down list.
3. Input a time in Power Save Delay (Seconds).
Virtual Sound
TOSHIBA Virtual Sound works as an audio filter using SRS WOW XT and
SRS TruSurround XT functions provided by SRS Labs, Inc. in United
States. The audio filter enables you to enjoy better quality sound and music
on your computer. For more information on using the TOSHIBA Virtual
Sound, refer to its help.
Modem
This section describes how to connect and disconnect the internal modem
to and from a telephone jack.
If No Power Savings is selected, the audio controller always runs.
If the High Power Saving option is selected, you will need to play an audio
file once before you use a microphone or play an audio CD.
■ Connection to any communication line other than an analog phone line
could cause a PC system failure.
■ Connect the built-in modem only to ordinary analog phone lines.
■ Never connect the built-in modem to a digital line (ISDN).
■ Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
■ Never connect the built-in modem to a key telephone system for
residences or offices.
■ Never operate your PC on AC power during a thunderstorm. If you see
lightning or hear thunder, immediately turn off the PC. An electric surge
caused by the storm, may result in a system failure, loss of data or
hardware damage.