Xerox DocuColor 7000 EN - Manual (Page 176)

DocuColor 8000/7000 Operator Manual 6-22
6. Maintenance
KEY POINT:
Vigorously shake and/or slap the new cartridge with
your hand until the Dry Ink/Toner is completely loosened. To
determine if the material is loose, place your finger tips on the flat
side of the gear cogs at the back of the cartridge and turn the gear
clockwise. When the gear turns freely, the material is loose and
the cartridge can be inserted into the compartment.
6. To insert the cartridge into the compartment, align the arrow on
the cartridge with the unlocked padlock on the compartment
and slide the cartridge into the compartment.
CAUTION:
If more than one cartridge needs to be replaced at
the same time, ensure that the cartridges are replaced in their
correct color locations. From left to right, the cartridge colors are
black, cyan, magenta, and yellow.
7. Rotate the cartridge clockwise until the arrow on the cartridge
is aligned with the locked padlock on the compartment.
8. Close the Dry Ink/Toner compartment.