Help, Audio tones, Help -24 audio tones -24 – Xerox DocuColor 7000 EN User Manual
Page 50

DocuColor 8000/7000 Operator Manual
1-24
1. Overview
Help
Press
Help
for an overview of the different options displayed in the
various tabs on the UI.
Audio tones
There are three audio tones:
•
Attention
:
The Attention Tone sounds six seconds after a scan job has
been completed to remind you to remove the document from
the Scanner glass.
•
Button Selection
:
A single tone indicates that the button you pressed can be
selected. A double tone indicates that the button is not
available.
•
Fault
:
The Fault Tone indicates that the digital press is in a fault
condition and does not operate until the fault is cleared.
The Audio Tones can be deactivated or made louder or softer
through the Tools Mode.
For more information, refer to the System Administration Guide.