Recording from external audio devices – Yamaha POCKETRAK 2G User Manual

Page 16

Advertising
background image

Recording

16

POCKETRAK 2G Reference Manual

Recording from external audio devices

1.

Use an audio cable to connect the stereo microphone socket (

socket) to

the headphones socket on the external autio device.

Note:

· For audio cable, use a 3.5mm stereo mini plug without resistance.

2.

While the recorder is stopped, press the MENU/STOP button for at least 2
seconds.

3.

Press the Y or T button to select “VOICE”, then press the W button.

4.

Press the Y or T button to select “REC SELECT”, then
press the
W button.

5.

Press the Y or T button to select “LINE”, then press the
W

button.

Note:

· If you record audio with an external stereo microphone, select “MIC” (

page 6

). For

external microphones, Yamaha recommends that you use an electret condenser micro-
phone with the capabilities of plug-in power operation, 2k

impedance, performance

guaranteed with a 1.3V power supply, and a 3.5mm stereo mini plug.

6.

Press the MENU/STOP button twice to quit the menu setting mode.

7.

Press the FOLDER/INDEX button to select the L (Line)
folder.
Even if one of the other folders is selected, audio data will be
recorded in the L folder.

8.

Start playback on the external device, then press the
PAUSE/REC button on the recorder to start recording.

To stereo microphone
socket

Audio device

To audio output
headphones socket

To LINE OUT (Recording)
socket

or

Advertising