Yamaha POCKETRAK 2G - Manual (Page 35)

Connecting to a Computer
POCKETRAK 2G Reference Manual
35
Connecting to a Computer
Computer system requirements
Windows
Macintosh
Note:
· For latest information about the minimum system requirements, check the web site
below.
<
http://www.yamahasynth.com/ >
Connecting the unit to your computer
You can connect the USB terminal on the recorder directly to a USB connector on your computer.
Open the USB terminal cover on the recorder, use the USB terminal slide switch to extend the
USB terminal, then insert the extended USB terminal in the correct orientation into a USB con-
nector on your computer.
Do not apply force to the terminal. Otherwise, it may break. If necessary, use the supplied
USB cable.
About the USB connection
In the menu settings, you can select either “USB2.0” or “for WMA DRM10” as an USB
connection mode (
page 34 ).
USB2.0: Select this mode in most cases, and specifically to transfer files to a computer
or to use the unit as a USB flash memory.
for WMA DRM10: Select this mode to transfer DRM10 content WMA files to the
unit.
Computer Windows-based computer with built-in USB interface
OS Windows Vista, XP
Others Speakers or headphones
Sound playback function
Computer Macintosh computer with built-in USB interface
OS Mac OS X 10.4, 10.5
Others Speakers or headphones
Sound playback function
Take note of the orientation
of the terminal.