Basic operations, Selecting a menu item, Using the headphones – Yamaha POCKETRAK 2G User Manual
Page 6: Using an external stereo microphone, Turning the power on or off, Auto power off function
Basic Operations
6
POCKETRAK 2G Reference Manual
Basic Operations
Selecting a menu item
Press and hold down the MENU/STOP button for at least two sec-
onds.
Press the
Y
or
T
button:
Moves the cursor highlight up/down.
Press the
W
button:
Selects the menu item.
Canceling the operation or return to the previous display
Press the MENU/STOP button:
Returns to the previous display.
Using the headphones
Connect the headphones to the
socket. The speaker will be disconnected auto-
matically.
Using an external stereo microphone
Connect an external stereo microphone (not supplied) to the
).
The built-in microphones are automatically disconnected.
Note:
· If you use an external stereo microphone, press and hold down the MENU/STOP button
for at least two seconds to access the VOICE menu, then select “MIC” for the REC
SELECT.
Turning the power on or off
Set the POWER/HOLD switch to the right.
“HELLO!” appears briefly on the display and the
power turns on, and then the last selected file num-
ber appears (Resume function).
Set the POWER/HOLD switch to the left. “SEE
YOU!” appears on the display and the power turns off.
Auto power off function
• If you leave the unit turned on for 15 minutes without using it, the unit will auto-
matically turn off.
• If you leave the unit turned on with a recording paused for more than 15 minutes,
the unit will turn off the power after it creates the recorded file.