Tuner mode, How to enter the tuner mode, Tuning – Yamaha DG60FX-112 User Manual

Page 22: Setting the standard pitch

Advertising
background image

22

Tuner Mode

When the pitch is low, the CHORUS and

FLANGER lamps will light. When the pitch is high,

the ROTARY and TREMOLO lamps will light.

Tune the note until only the PHASER lamp lights.

Tuning is complete. (At this time the BANK

switch’s lamp will also light.)

This mode is used for tuning your guitar. In the Tuner Mode, the DG60FX-112 works as a
chromatic tuner.

How to Enter the Tuner Mode

To enter the Tuner Mode, use any one of the meth-
ods described below.

• Simultaneously press the [UTILITY] button and

the [STORE] button.

• In the Play Mode, hold the BANK switch until

tu

” appears in the display (all Foot Switch 1-3

and BANK Switch lamps go off). (The Tuner
Mode comes after the Bank Select Mode.)

• In the Bank Select Mode, hold the BANK switch

until “

tu

” appears in the display (all Foot Switch

1-3 and Bank Switch lamps go off).

When in the Tuner Mode, each of the DG60FX-
112’s outputs (Speaker, LINE OUT, PHONES,
DIGITAL OUT) will be muted (does not pro-
duce any sound).

A

B

b

C

D

b

D

E

b

E

F G

b

G A

b

A

bb C

db d

Eb E

F Gb G Ab

Tuning

The name of the note closest to that which you
played will appear in the display, and five lamps on
the Control Panel and three lamps above the BANK
Switch will be used to indicate whether the note’s
pitch is high, low or in tune.

1. To change the standard pitch, use the [UP]/

[DOWN] buttons. (Refer to “Setting the Standard
Pitch”.)

2. Play the note you want to tune (play only a single

note).

At first, tune the guitar so that the note name of

the note you want to tune to appears in the dis-

play.

Notes are displayed as follows.

3. Press the [UTILITY] button or the BANK switch

to return to the Play Mode.

Flashes
Faster

Flashes
Slower

Lower

the pitch

Raise

the pitch

Raise

the pitch

Lower

the pitch

Tuning is

complete

Control Panel

Foot Switch

Unit

Setting the Standard Pitch

Usually the standard pitch is set to A-440Hz, there
are some cases in which the standard pitch of an
acoustic piano, etc. is not 440Hz.
The standard pitch of the DG60FX-112 can be set
anywhere from 436Hz to 444Hz.

1. In the Tuner Mode, press the [UP] button or the

[DOWN] button and the standard pitch will ap-
pear on the display.

* When the DG60FX-112’s power is switched ON, the stan-

dard pitch is set to 440Hz.

2. Every time the [UP] button is pressed the stan-

dard pitch will increase by 1Hz. Likewise, every
time the [DOWN] button is pressed the standard
pitch will decrease by 1Hz.

Lights

Advertising