Figure 105 firmware upload, Table 80 firmware upload – ZyXEL Communications G-2000 Plus User Manual
Page 246
Advertising
ZyAIR G-2000 Plus User’s Guide
245
Chapter 19 Maintenance
Figure 105 Firmware Upload
The following table describes the labels in this screen.
Table 80 Firmware Upload
LABEL
DESCRIPTION
File Path
Type in the location of the file you want to upload in this field or click Browse ...
to find it.
Browse...
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two
minutes.
Note: Do not turn off the ZyAIR while firmware upload is in
progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the ZyAIR again.
Advertising