ZyXEL Communications G-2000 Plus - Manual (Page 87)

ZyAIR G-2000 Plus User’s Guide
Chapter 6 Wireless Configuration and Roaming 86
Figure 27 Roaming
The following table describes the labels in this screen.
Table 21 Roaming
LABEL DESCRIPTION
Active
Select Yes from the drop-down list box to enable roaming on the ZyAIR if you have
two or more ZyAIRs on the same subnet.
Note: All APs on the same subnet and the wireless stations must
have the same ESSID to allow roaming.
Port
Enter the port number to communicate roaming information between APs. The port
number must be the same on all APs. The default is 3517. Make sure this port is not
used by other services.
Apply Click Apply to save your changes back to the ZyAIR.
Reset Click Reset to reload the previous configuration for this screen.