Track setting for recording (quick recording), Track setting for recording, Quick recording) – Yamaha 9000 Pro User Manual

Page 113: Song creator

Advertising
background image

Song Creator

Song Creator

Reference

113

Punch In Trigger

• First Key On ...... When FIRST KEY ON is selected, recording will begin when the first

key is played on the keyboard.

• Footswitch 1/2 ... When FOOT SW 1 or FOOT SW 2 is selected, recording will begin

when a footswitch connected to the corresponding rear-panel FOOT
SWITCH jack is pressed.

• Auto Set ............ When AUTO SET is selected, the punch-in and punch-out measures

are specified by the IN and OUT buttons (i.e., recording begins auto-
matically at the IN measure and ends at the OUT measure).

Part Selecting/Record Selecting
The default part for each track is displayed above the REC setting. The parts can be
changed as required by pressing the [PART SEL.] LCD button (the part names for
each track will be highlighted), selecting the desired parts via the corresponding but-
tons. When the parts have been changed, press the [REC SEL.] LCD button (the PART
SEL. LCD button will have changed to the [REC SEL.] LCD button) again to return to
the normal track setup display.

Delete
When the [DEL.] LCD button is pressed DELETE will appear for tracks which contain
data. Select DELETE via the corresponding LCD buttons while holding the [DEL.]
button to delete all data in the corresponding tracks. The data is actually deleted when
the [DEL.] LCD button is released.

Song Save/Delete

• Save ................ This function saves the edited song to the disk.
• Delete ............. This function deletes the specified song file from the disk.

Track Setting for Recording (Quick Recording)

The explanations here apply to step #5 on page 111.

Delete
When the [DEL.] LCD button is pressed DELETE will appear for tracks which contain
data. Select “DELETE” via the corresponding LCD buttons while holding the [DEL.]
button to delete all data in the corresponding tracks. The data is actually deleted when
the [DEL.] LCD button is released.

Set the desired track to “REC.”

Change the measure at which recording starts.

Play track

Muted track

No data

Record track

See page 125.

111

Advertising