Yamaha 9000 Pro - Manual (Page 152)

Disk/SCSI Operations Disk/SCSI Operations
152 Reference
Loading Data from a Disk to Flash ROM
This operation lets you load the specified file from a floppy disk, an optional hard disk,
or an optional SCSI device to Flash ROM.
The explanations here apply to step #3 of the Basic Procedure on page 150.
● Select a source file in the disk.
● Select a Load method.
If an optional hard
disk has been
installed or an
optional SCSI
device has been
connected, the
appropriate device
must be selected
here.
Select this to display
the property of the
selected file.
For details on directory file
selection, see page 151.
● Select the destination.
CAUTION
• When data is loaded from a
floppy disk to the 9000Pro,
the data already in the mem-
ory of the instrument will be
replaced by the data on the
disk. Save important data to
a disk file before doing the
Load operation.
• Loading style data can be exe-
cuted via the Style Manager
function (page 74).
Set the data type to ON or OFF.
Data types set to ON will be loaded.
Flash ROM data for which the data
type has been set to OFF will be
retained.
● Execute the Load operation by following the on-screen instructions.
Select the source data
in the disk. Select the destination.
SETUP All setup data —
see list on page
214.
EFFECT
DATA All User effect data
— page 146.
REGIS-
TRATION All Registration
Memory data —
page 214.
MULTI
PAD All Multi Pad data —
page 141.
CUSTOM
VOICE All Custom Voice
data including wave
data saved using
the Wave save op-
tion — page 92.
ORGAN
FLUTES All Organ Flutes
settings — page 62.
NEXT BACK
PAGE CONTROL
NEXT BACK
PAGE CONTROL
NEXT BACK
PAGE CONTROL
NEXT BACK
PAGE CONTROL
150