Yamaha 9000 Pro - Manual (Page 55)

Memory Structure Memory Structure
Basic Operation 55
■ About System Backup
Important information about the 9000Pro’s current settings, such as the selected
style number, the Split Point setting, the fingering mode, and MIDI-related set-
tings, can be retained in the Flash ROM. To do this, press the quarter note icon
button (
) from the main display and follow the on-screen instructions.
For a complete list of System Backup parameters, refer to page 214.
To return the System Backup parameters to the original factory settings, simulta-
neously hold down the [DEMO] button and turn on the power.
■ About the Style Data
This diagram illustrates the relationship among the style data stored to different types
of memory. In addition to normal memory provisions, the 9000Pro features special
Flash ROM memory. Unlike conventional ROM, Flash ROM can be overwritten —
allowing you to store your own original data. A number of pre-programmed styles
have been loaded to the Flash ROM; these are referred to below as “Flash styles.”
Preset styles are stored to conventional ROM. These are permanent and cannot be
overwritten. However, you can use these as a basis for creating your own original
styles with the Style Creator (page 126). Use the Style Manager functions (page 74) to
backup and organize your original style data.
Playing the disk styles can be done in two ways: 1) loading the style data to Flash ROM
and playing it back as a Flash style, or 2) playing it back directly from disk, with the
Disk Direct function (page 25).
■ About the Plug-in Voice Data
See page 64.
Keep in mind the following points when
using the memory devices.
• Song files can be played back without
loading the data to Flash ROM or inter-
nal memory (RAM).
• Style files can be played back from
Flash ROM, after loading the data from
disk to Flash ROM. They can also be
played directly from disk by using the
Disk Direct function (page 25).
• For saving/loading any data other than
style data between disk and Flash ROM,
use the Disk/SCSI function (page 150).
Saving/loading style data is done with
the Style Manager functions (page 74).
• One Touch Setting data can be saved/
loaded with the Flash style; however, it
cannot be saved/loaded separately by
itself.
• Music Database data can be loaded
with the Disk Style data. Actually, the
One Touch Setting data programmed
with the Disk Style data is loaded as the
Music Database. The Music Database
data cannot be saved/loaded separately
by itself.
[System Backup]
LCD button
• Storing your original style data
to Flash ROM erases the fac-
tory programmed Flash style
data (at the corresponding
number locations). If you've
deleted the factory-set data,
you can use the Restore func-
tion (page 154) to load a copy
of it from the included disks
(page 6).
Accompaniment playback
Style Creator
Style Manager
Disk Direct
Preset Style Flash Style Disk Style
Save
Store
Load
See page 74.
See page 126.
See page 20.
See page 25.
• Flash Style data can be
loaded/saved with or without its
One Touch Setting setups.
53