Yamaha 9000 Pro - Manual (Page 66)

Plug-in Voices Plug-in Voices
66 Reference
Plug-in Manager
This function lets you manage the Plug-in Voice related parameters as disk files.
The following three types of parameters (described in the illustration on page 64) are
available:
The operations for each function corresponding to step #4 are covered in the following
explanations.
■ Load Plug-in Custom Voice..........................................................................................
The explanations here apply to step #4 above.
● All
The three types of parameters explained in the chart above can all be loaded together. Use
the instructions here for loading in step #3 of the Quick Guide on page 42.
Plug-in Custom Voices These can be edited via the Plug-in Custom Voice Creator func-
tion (page 102).
Native System Parameters These can be edited via the Native System Parameter Edit func-
tion (page 105). Available parameters vary according to the in-
stalled board.
Board Custom Voices These can be edited via your computer. See pages 100 and 106
for details.
Basic Procedure
3
Select the desired function.
1
Select a Plug-in Voice
category.
4
Execute the selected function.
2
Select this to call up the
Plug-in Manager display.
Quick Guide
Step#3 on page 42
NEXT BACK
PAGE CONTROL
NEXT BACK
PAGE CONTROL
Select the file to be loaded.
See page 151 for details on directory/file
selection.
Select this to
display the
property of the
selected file.
If an optional SCSI device is connected
or the optional internal hard disk is
installed, select the appropriate device.
See page 150 for details.
64