Operation – Zenoah HC510DV User Manual
Page 18
18
In case of cold start of the engine, apply 1~2
minutes of warming up operation before use.
■ STOPPING ENGINE
• In an emergency, immediately stop the
engine.
• Even after stopping the engine, the cutter
blade continues to turn awhile by inertia. Do
not touch the blade until it is fully stopped.
• Do not touch a muffler or the spark plug by
bare hands immediately after stopping the
engine. There is a danger of burn for its high
temperature.
1. Return the throttle lever and operate for a while
at low speed.
2. OFF the power switch.
(1) ON
(2) OFF
(3) Switch
Stopping operation at high engine speed causes
extra stress on the engine. Except for emergency,
reduce the engine speed by returning the throttle
lever, and then apply stop operations.
IMPORTANT
WARNING
8. Operation
OP5