Maintenance – Zenoah HC510DV User Manual

Page 21

Advertising
background image

• Clogging of air filter reduces engine

performances. Inside of an engine will quickly
wear by dusts if an air cleaner cover is not
correctly fitted or if a filter is missed, deformed,
or damaged.

• Avoid dusts to penetrate into the engine when

removing the air filter. Cover an air inlet with a
cloth after removing the filter.

• To keep the engine performance, change the air

filter at every 20 hours of operation.

■ SPARK PLUG

Do not touch the spark plug by bare hands
immediately after stopping the engine. There is
a danger of burn for its high temperature.

About every 25 hours of operation, remove the
spark plug and clean contaminant on electrodes
with a wire brush, etc.
Applicable gap between the electrodes is
0.6~0.7mm.

Use specified spark plug for exchange.

Specified Spark Plug:

NGK BPM8Y

Electrodes of the spark plug are contaminated by
over sucking of fuel or by poor quality oil. This may
cause the engine start difficult.

■ FUEL FILTER
About every 25 hours of operation, remove a fuel
filter from the fuel tank and remove adhered debris.
In case the filter is clogged, exchange with a new
one.
Care should be taken not to bend a fuel pipe when
setting the filter back into the tank.

(1) Fuel filter

IMPORTANT

WARNING

IMPORTANT

9. Maintenance

MA3

0.6~0.7mm

MA2

21

Advertising