ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 25)

ZyXEL AG-120 User’s Guide
Chapter 1 Getting Started 25
1.2.2 Access Point Mode
You can also set the AG-120 to access point mode. In access point mode, your AG-120
functions as an access point. This allows you to set up your wireless networks without using a
dedicated AP. The following figure shows a network example.
Figure 3 Application: Access Point Mode
In the example, the AG-120 is installed on computer A and set to operate in access point
mode. Computer A provides an Internet connection to the wireless LAN, so wireless stations
B and C can access the Internet.
Note: With WZC, you cannot use the AG-120 as an access point.
1.2.3 Changing AG-120 Mode
To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screens.
Figure 4 ZyXEL Utility: Change Modes