ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 50)

ZyXEL AG-120 User’s Guide
50 Chapter 4 Wireless Station Mode Configuration
4.3.1 Security Settings
When you configure the AG-120 to connect to a network with wireless security activated and
the security settings are different on the AG-120, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 25 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device is scanned.
Table 5 Station Mode: Site Survey (continued)
LABEL DESCRIPTION
Table 6 Station Mode: Security Setting: WEP
LABEL DESCRIPTION
Security Setting
WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Encryption Type Select an authentication method. Choices are Auto, Open System and Shared
Key.
Refer to
Section 3.2.3.1.2 on page 39 for more information.
Pass Phrase Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the AG-120 automatically generates four different WEP keys and
displays one of them in the key field below. Refer to Section 3.2.3.1.1 on page 39
for more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.