B. access point mode setup example, Appendix b access point mode setup example, Figure 47 windows 2000: start – ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 User Manual
Page 81: Access point mode setup example
ZyXEL AG-120 User’s Guide
Appendix B Access Point Mode Setup Example
81
A
P P E N D I X
B
Access Point Mode Setup Example
This example uses the network sharing feature in Windows 2000 to bridge the wired and
wireless network when you set the AG-120 in access point (AP) mode.
for setup methods and requirements.
Steps may vary depending on your Windows version. You may need to install additional
software in Windows 98 Second Edition and Windows ME.
Configuring the Computer on Which You Install the AG-120
1 Refer to
to set the AG-120 to operate in AP mode.
2 Click Start, Settings, Network and Dial-up Connections (or click Start, Settings,
Control Panel and double-click Network and Dial-up Connections).
Figure 47 Windows 2000: Start
3 Right-click on the icon for your wired Ethernet adapter and click Properties.