ZyXEL Communications 802.11a/g Wireless CardBus Card ZyXEL AG-120 - Manual (Page 59)

ZyXEL AG-120 User’s Guide
Chapter 4 Wireless Station Mode Configuration 59
Figure 32 Station Mode: Profile: Select a Channel
The following table describes the labels in this screen.
3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,
WPA, WPA2-PSK, WPA2 or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select Disabled to allow the AG-120 to communicate
with the access points or other peer wireless computers without any data encryption and
skip to step
5 .
Table 13 Station Mode: Profile: Select a Channel
LABEL DESCRIPTION
Wireless Settings
Channel Select a channel number from the drop-down list box. To associate with an ad-hoc
network, you must use the same channel as the peer computer.