Xircom RM56V1 - Manual (Page 12)

2-4 RealPort Modem 56 User’s Guide
Use the Modem Diagnostics Tool to verify the computer-to-
modem interface.
1 In the Modems option in Control Panel, click Diagnostics.
2 In Diagnostics properties, highlight the COM port associated
with the Xircom modem and click the More Info button. This
causes Windows to send commands to and read responses
from the modem and display information about the modem
and its COM port. The Port Information box should display the
following information:
•
The IRQ and I/O address of the modem’s COM port.
These should match the physical configuration of the port
or modem adapter.
• Modem responses to various AT commands. The Xircom
modem may return ERROR for some AT commands that
are not supported. This does not indicate a failure.
3 A log file can be useful to help identify modem problems by
recording modem commands and responses. Windows 95 and
98 have slightly different procedures for creating and maintain-
ing a log file:
• In Windows 95, go to Control Panel, Modems, Properties,
Connection, Advanced. In the Advanced Connection Settings
window, place a check mark in the Record a log file option
box. A MODEMLOG.TXT file will be created in the
C:\WINDOWS directory the next time the modem is used.
• Windows 98 creates a log file by default in the Windows
directory, using a filename based on the modem device
identifier, with a .LOG extension, in this case
"Xircom_Modem_56.log" (or a shortened version in MS-
DOS). To continue adding information to the log file, place
a check mark in the Append to Log option box in the
Advanced Connection Settings window (see the Windows 95
instructions above for the complete path to this window).