Xircom RM56V1 - Manual (Page 25)

Appendixes A-9
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to the digital device not expressly approved by
Xircom Inc. could void the user’s authority to operate the equipment.
It is suggested that only shielded and grounded cables be used with the
equipment to ensure compliance with FCC rules.
FCC Regulations - Part 68
To comply with the Federal Communications Commission (FCC) Rules and
Regulations, Parts 68, these instructions must be followed:
1 Your modem must not be connected to a party line or coin-operated
telephone.
2 If a problem occurs on the telephone line, your modem must be
disconnected from the telephone line until it has been determined that
your modem is not the cause of the problem.
3 All repairs to your modem must be made by Xircom, Inc. Unauthorized
or unorthodox repair methods can alter the modem’s radio frequency
emissions and other characteristics sufficiently to void your authority to
operate the modem over a public telephone network.
4 If requested, you must be prepared to provide the telephone company
with the following information:
Equipment Manufacturer: Xircom, Inc.
2300 Corporate Center Drive
Thousand Oaks, CA 91320-1420 U.S.A.
Model: RM56V1
FCC Registration Number: See the unit.
Ringer Equivalency Number: See the unit.
This equipment complies with Part 68 of the FCC Rules. On the back of the
RealPort Modem 56 is a label that contains, among other information, the FCC
Registration Number and Ringer Equivalency Number (REN) for this equipment.
You must, upon request, provide this information to your telephone company.