ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 132)

120 AT Command Set Reference
Command Options Function & Description Ref.
&Ln Analog port selection during call
answering. S84.5
&L0 Set priority to analog port, Phone 1.
&L1 Set priority to analog port, Phone 2.
&Mn Bundle selection (See also S100). S14b6-7
&M0 * Asynchronous mode with data
buffering.
&M1 Asynchronous command,
synchronous data.
&M2 Direct asynchronous mode, no data
buffering.
&M3 Synchronous mode.
&On Set default call type for conventional
dialing commands. S83.4-5
&O0 ATDs, ATDPs, and ATDTs default
to make calls for analog adapter,
Phone 2.
&O2 ATDs, ATDPs, and ATDTs default
to make ISDN data calls.
&O3 ATDs, ATDPs, and ATDTs default
to make calls for the analog adapter,
Phone 1
&Sn Data Set Ready (DSR) function
selection. S21.3
&S0 * DSR overridden, DSR always ON.
&S1 DSR according to CCITT (ITU-
TSS). (See also S41.5, S44.4)
&Tn TA testing.
&T9 Initiate ISDN Loopback test.
&T10 Initiate ISDN Loopback with self
test.
&T11 Initiate ISDN Loopback from B1
through switch to B2.
&Vn View profile settings.