ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 93)

Advanced ISDN Call Control 81
Example: ATS80.4=0 disables Low-Layer-Compatibility message
for Analog Port 2 (omni.net).
Control of ISDN Phone Number and Sub-address
The Calling-Party-Number information element identifies the origin
of a call, and the Called-Party-Number information element identifies
the destination of a call.
The Calling-Party-Subaddress information element identifies the
Subaddress associated with the origin of a call.
The Called-Party-Subaddress information identifies the Subaddress
of the destination call.
Each type of outgoing call can be assigned with one
Number/Subaddress pair by using the command
AT&ZOx=s. The
possible values for x are as follows:
•
x = I - for ISDN data calls.
•
x = A - for the analog adapter 1 (non-data).
•
x = B - for the analog adapter 2 (omni.net).
The number-Subaddress-string ‘s’ is defined as:
s = [[Yn][Nn]own-number][/[[Zn]own-Subaddress]/]
where Yn specifies the number type:
•
Y0 - unknown (default if Yn is omitted).
•
Y1 - international number.
•
Y2 - national number.
•
Y3 - network specific number.
•
Y4 - subscriber number.
Nn is the identifier of numbering plan:
•
N0 - unknown (default if Nn is omitted).