ZyXEL Communications ACCESSING INTERNET & INTRANET omni series - Manual (Page 135)

AT Command Set Reference 123
Command Options Function & Description Ref.
*GCn n=0-1 Call-back function selection.
*GC0 * Disable call-back function
*GC1
Enable call-back function
*HCn n=0-4 Assign call-back phone number, “s” to
storage location, “n”
*Hn n=0-39 Modify user password table at
location n.
*HS Modify supervisory password
(Default: “ZyXEL”)
*In n=0-1 Command set selection. S17b6-
7
*I0 * AT command set.
*I1 V.25bis command set.
*Mn n=0-1 Leased line auto-handshake mode
selection. S17b6-
7
*M0 * Leased line auto-handshake on
Originate mode.
*M1 Leased line auto-handshake on
Answer mode.
*T Recall the last CND (Caller ID)
information.
*V View the Password table
*VC View the Call-back Number table