Zanussi ZWF 14791 W - Manual (Page 19)

19
The delay time value decreases by one unit
every hour and then, when 1 hours remain,
the time decreases every minute.
Incorrect option selection
If an option which is not compatible with the set
wash programme is selected, the message
«Err» is displayed for about 2 seconds and the
integrated red Start/Pause light start flashing.
Alarm codes
In the event of operating problems, some alarm
codes can be displayed, for example «
E20
»
(see paragraph “Something not working”).
Heating phase
During the washing cycle the display shows a
temperature icon animated to indicate that the
appliance has started the heating phase of the
9
Spin Soil Level Easy Iron Extra Rinse Temp.
Temp. Spin Soil Level Easy Iron Extra Rinse
Start/Pause
Temp. Spin Soil Level Easy Iron Extra Rinse Start/Pause
water in the tub.
End of programme
When the programme has finisheda flashing
zero « 0.00 » is displayed, the «Door Locked»
icon desappears and the door can be
opened.
10. Select the Start/Pause
To start the selected programme, press the
«Start/Pause» button; the corresponding green
pilot light stops flashing.
The «Door Locked» icon appears on the
display to indicate that the appliance starts
operating and the door is locked.
To interrupt a programme which is running,
depress the «Start/Pause» button: the
corresponding green pilot light starts to flash.
To restart the programme from the point at
which it was interrupted, press the
«Start/Pause» button again.
If you have chosen a delayed start, the
machine will begin the countdown.
9
Spin Soil Level Easy Iron Extra Rinse Temp.
Start/Pause
Temp. Spin Soil Level Easy Iron Extra Rinse
Operating sequence
Smart 132972560.qxd 18/06/2007 14.30 Pagina 19