Zanussi ZWF 14791 W - Manual (Page 20)

20
IMPORTANT!
If an incorrect option is selected, the red pilot
light of the «Start/ Pause» button flashes for 3
times and the message Err is displayed for few
seconds. Three acoustic signals sound.
11. Select the Delay Start
By means of this button, the wash programme
can be delayed from 30 min - 60 min - 90 min,
2 hours and then by 1 hour up to a maximum
of 20 hours.
Before you start the programme, if you wish to
delay the start, press repeatedly the «Delay
Start» buttons and , to select the
desired delay. The corresponding icon will
appear on the display in the upper part of the
display.
The selected delay time value (up to 20 hours)
will appear on the display for about 3 seconds,
then the duration of the programme will appear
again.
You must select this option after you have set
the programme and before you press the
Start/Pause button.
Selecting the delayed start:
●
Select the programme and the required
options.
●
Select the delay start.
●
Depress «Start/Pause» button: the machine
starts its hourly countdown.
The programme will start after the selected
delay has expired.
Delay Start
Spin Soil Level Easy Iron Extra Rinse Temp.
Cancelling the delayed start:
You can cancel the delay time at any moment,
before you press the «Start/Pause» button.
If you have already pressed the Start/Pause
button, and you wish to cancel the delay time,
proceed as follows:
• set the washing machine to PAUSE by
pressing the «Start/Pause» button;
• press the Delay Start buttons once until the
symbol « 0’ » is displayed.
• press the «Start/Pause» button again to start
the programme.
IMPORTANT!
The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washing machine to PAUSE by
pressing the «Start/Pause» button, wait until
the «Door Locked» icon desappears. After
you have closed the door, press the
«Start/Pause» button again.
Note!
The Delay Start cannot be selected with
Drain programme.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause
the washing machine by pressing the
«Start/Pause» button.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to «Off» and then to the new
programme position. Start the new programme
by depressing the «Start/Pause» button again.
The washing water in the tub will not emptied
out.
Operating sequence
Smart 132972560.qxd 18/06/2007 14.30 Pagina 20