Xantrex Technology SW Communications Adapter - Manual (Page 16)

2.0 INSTALLATION
8
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
INSTALLING THE SWCPS DOS PROGRAM
A control panel simulation software program included on the floppy disk allows
an IBM-compatible personal computer to operate as a virtual control panel for up to
eight SW series inverter/chargers.
For other computer platforms, See SECTION 3.0 OPERATION, Use of the
SWCA with Terminal Emulation Programs, on page 9.
To install the software, insert the floppy disk into your computer floppy drive
and copy the file
swcps.exe from the floppy disk provided to the hard disk on the
computer. Remember the location of this file on the hard disk for later reference.
Alternately, the program can be run directly from the floppy disk.