Xantrex Technology SW Communications Adapter - Manual (Page 24)

3.0 OPERATION
16
©2002 Xantrex Technology Inc.
P/N 973-0022-01-01 Rev A 04/2002
USE OF THE SWCA WITH TERMINAL EMULATION PROGRAMS
Modem connection requires the use of a terminal emulation program as
described in the following sections. A modem is required at both the inverters
and at the computer, with a phone line available to make the connection.
The SW Communications Adapter (SWCA) supports use with “terminal
emulation” programs. Any computer that has available serial communications port
and terminal emulation software can communicate with the SW series inverter
using a cable and modem connection.
Making a New Connection
1. Start the terminal emulation software of your choice.
2. Enter “SWCA” in the Name location.
3. Select the desired icon.
4. Click “OK”.
Figure 3-3
Making a New Connection