Xirlink IBM PC & Net Camera - Manual (Page 26)

Figure 1 Figure 2
2 5
• Next, fill in the checkbox for the “Use VFW” option and then press
the “Fix it” button. (Figure 2)
• Plug the IBM PC/Net Camera back into the computer and then click
on “Click here to restart video” to restart the IBM PC/Net Camera.
This will allow the camera to start up properly.
If the problem persists, please consult our extended troubleshooting
tips on our website at
http://www.cameratechsupport.com/IBM.
Problem: “Class not registered. hr=0x80040154 (or hr=0x800706F8)”
Solution: Refer to the “No such interface supported” solution.