Xirlink IBM PC & Net Camera - Manual (Page 29)

2 8
B. Windows Me:
1) Click on a button named “Update Driver.” Click this button to update
the driver.
2) Make sure “Automatic search for a better driver. (Recommended)”
is selected, then press “Next.”
3) Windows Me will then proceed through a detection process, searching
for better drivers.
4) After the detection process you will get this message:
“Windows was unable to locate an updated driver for this
device, but did find other drivers that should work with this
device.
You are already using the best driver for this device. What
would you like to do?
· Continue using the current driver. (Recommended)
IBM PC Camera
· Install one of the other drivers. - View List”
5) Select “Install one of the other drivers” and then click the “View
List” button.
6) There will be a list of 1-4 possible IBM PC/Net Camera drivers.
Usually, there will be a few drivers from the CD-ROM drive and 1 from
the Hard Drive.
7) Select the IBM PC Camera driver that is located on the hard drive
(C:\Windows\INF) to update the driver.
8) Press “Next” and then press the “Finish” button. Windows will
prompt you to restart the computer. Click “Yes” to restart the com-
puter.
9) You should now be able to use the IBM PC Camera software.