Xirlink IBM PC & Net Camera - Manual (Page 5)

4
How to Connect the IBM PC & Net Camera
Plug the USB connector on the camera into any available USB port on your
computer. A window should appear and recognize a new device being
installed.
Note: If your computer does not recognize a new device installed, please
refer to the Troubleshooting section of the manual (see pages 24-30).
The IBM PC & Net Camera Application
2. The Application window opens and displays your
camera’s video image.
Note: If you do not see an image:
a.) Try closing and re-opening the
IBM PC & Net Camera Application - OR
b.) Unplug the camera, restart your computer.
Then plug the camera in again.
If you still cannot see any images, please consult
the Troubleshooting section.
1. Double-click the icon on your desktop.