Yamaha CDM-900 - Manual (Page 17)

17
English
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number.
2
1, 3
1
Select a track which has index numbers.
2
3
Select the desired index number.
To cancel the index search function
Press the INDEX button.
Notes
• Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (for
example, the movements within classical symphonies) for
easier location of those parts. The liner notes with the disc
usually tell if such index numbers are included.
• If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
• For some discs, play may begin slightly prior to the actual
designated index point.
• If the disc has no encoded index points, play will begin from
the start of the selected track.
• The index number can be designated only while “INDEX”
appears in the display.
INDEX
1
6 7 8 9 0
2 3 4 5
1
6 7 8 9 0
2 3 4 5
INTRO SCAN
You can check the discs in the unit by listening to a short segment of each disc in turn. The unit will play several seconds segment
from the second minutes of each disc. The unit scans discs in order of disc number from the current disc.
When the desired disc is located
During Intro scan, when the desired disc is located, press
INTRO or PLAY to exit Intro scan and continue listening.
To stop Intro scan
Press STOP.
1
Stop the unit.
2
STOP
INTRO
Note
• During program play mode, the unit scans all the discs in the
unit.
ENTER
1
6 7 8 9 0
2 3 4 5
A B C D E
POWER ACTIVE ALL PROG +1 DISC
INTRO FILE MODE TEXT MODE TIME MODE TEXT SRCH
DISC GROUP
FILE EDIT GROUP EDIT DISC DELETE CAPS
INDEX REPEAT RANDOM
STOP PAUSE PLAY
ENTER
DISK SKIP
SKIP
SEARCH
/ I