Yamaha CDM-900 - Manual (Page 8)

8
To stop play temporarily
To stop play completely
To resume play, press PAUSE again (or press PLAY).
* The
button on the front panel can also be used to stop
play temporarily or to resume play.
BASIC OPERATION
1
1
Turn the power on.
2
Press DISC SKIP repeatedly until the desired disc
number appears in the display.
Display information during disc play 1 Shows the disc number selected or being played.
2 Shows the track number selected or being played.
3 Shows the time. (Refer to “Selecting time displays” on page
10.)
4 Shows the CD track numbers (up to 20). After each track is
played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.
To turn off the unit (standby mode)
Press POWER again.
1
2
3
DISC SKIP
PAUSE
STOP
“DISC LOADING” appears in the display for a few
seconds. Then, the disc number that was played most
recently appears in the display.
3
The unit plays all discs in the unit from the selected one.
PLAY
Note
• To play all the discs in the unit, make sure the “ALL” indicator
appears in the display. If not, press ALL.
In ALL play mode, the unit plays all the discs from the
selected one. Empty disc slots are skipped.
ALL
DISC TRACK
6
11
16
7
12
17
8
13
18
9
14
19
5
10
15
20
1 2
3 4
/ I
POWER
1
6 7 8 9 0
2 3 4 5
A B C D E
POWER ACTIVE ALL PROG +1 DISC
INTRO FILE MODE TEXT MODE TIME MODE TEXT SRCH
DISC GROUP
FILE EDIT GROUP EDIT DISC DELETE CAPS
INDEX REPEAT RANDOM
STOP PAUSE PLAY
ENTER
DISK SKIP
SKIP
SEARCH
/ I