Yamaha CDM-900 - Manual (Page 20)

20
To play a disc with “BEST FILING” program
1 . Press STOP to stop the unit.
2 . Press FILE MODE so that “FILE” appears in the display.
If “SAVE” and “BEST” appear in the display, the unit reads
“BEST FILING” program.
3
. Press PLAY to start playing.
Notes
• If the disc does not have any “BEST FILING” program data in
the memory, “BEST” does not appear in the display, and the
unit does not perform the “BEST FILING” function.
• When the FILE indicator is illuminated in the display, you can
play the filed data in random order by pressing RANDOM.
To check “BEST FILING” program data
1 . Press STOP to stop “BEST FILING” program play.
2 . Press FILE EDIT.
3
. Press SKIP . Each time you press this button, the
track number and the program number are displayed in the
order of the program. When you want to check the
preceding tracks, press SKIP
.
To change “BEST FILING” program data
1
. Follow the preceding procedure described in “To check
“BEST FILING” program data.”
2 . Display the track number to be deleted or corrected by
pressing SKIP.
3 . Press the number button of the desired track you want to
substitute for the one currently displayed. The previously
programmed track will be cleared from the memory and
the new one will be programmed.
If you want to delete the programmed track currently
displayed, press DELETE.
4 . When you are finished, press FILE EDIT.
To delete all discs “BEST FILING” program data
Press DELETE for more than 5 seconds after step 2 of the
procedure described in “To delete text data” on page 19.
CAUTION
Deleting all discs “BEST FILING” program data will also
erase the entire contents of memory (including album title
or artist name). Be careful.
It is possible to file only those tracks you want from each disc (i.e., hide unwanted tracks). You can easily play back the tracks in any
order you set.
BEST FILING
1
During stop, press DISC SKIP to select the disc to
which you want to edit.
(Make sure that “PROGRAM” indicator in the display is
turned off before this step.)
2
Press FILE EDIT repeatedly until “BEST” appears in
the display.
4
Repeat steps 2 and 3 to program more tracks. You can
select the same track again.
3
Press the number button of the desired track, then
press ENTER.
5
Press FILE EDIT to store the text data.
“SAVE” and “BEST” appear in the display.
To input your favorite tracks
Selected track number
1
2
3, 5
3
Notes
• You can create as many as 32 edits for a each disc.
• If you input a track that the unit cannot accept, “ERROR”
appears in the display.
• The unit’s memory can hold information for about 200 discs.
When the memory is full, “MEMORY FULL” appears in the
display. To add more text data, you must first erase some
unnecessary files from memory. See “To change program
data” on this page.
TRACK EDIT
BEST
TRACK EDIT
BEST
1
6 7 8 9 0
2 3 4 5
A B C D E
POWER ACTIVE ALL PROG +1 DISC
INTRO FILE MODE TEXT MODE TIME MODE TEXT SRCH
DISC GROUP
FILE EDIT GROUP EDIT DISC DELETE CAPS
INDEX REPEAT RANDOM
STOP PAUSE PLAY
ENTER
DISK SKIP
SKIP
SEARCH
/ I