Zoom GFX-3 - Manual (Page 9)

Quick Guide
ZOOM GFX-3 9
Storing effects
To switch the effect module on or
off, push the expression pedal fully
down.
The expression pedal also incorporates a
push-down switch that allows on/off control
of a specific effect module.
For an explanation of how to select the module
to be operated with the pedal, see page 15.
To store the modified patch, press the
[STORE] key.
The GFX-3 goes into store standby condition.
If necessary, use the BANK[
Q]/[W] keys and the
foot switches [1] - [3] to select the bank and patch
number in which to store the current effect settings.
* If a patch from a preset group was selected, the patch
number 1 of user group bank "U0" will automatically
be selected as store target.
To carry out the store process, press the
[STORE] key once more.
To cancel the operation, press the [GROUP/EXIT]
key.
For a detailed explanation of the store procedure, see
page 14.
For information on how to return the user group patches
to the factory default condition, see page 14.
Modifying the sound of
a patch
[DRIVE] selector
Selects the DRIVE module
distortion type. [REV/DLY] selector
Selects the REV/DLY module
effect type.
[MOD] selector
Selects the MOD module
effect type.
Module keys
Pressing these keys repeatedly switches the respective
module on and off.
While playing your instrument, use the
following selectors and keys.
2
1
2
Push down
all the way
En-GFX3.book 9 ページ ２００４年１１月８日 月曜日 午後４時３０分